REPLISIL Silicone Rubber 32 N Blue Medium Hard Set Duplicating Silicone Liquid

Description

REPLISIL Silicone Rubber 32 N Blue Medium Hard Set Duplicating Silicone Liquid
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
REPLISIL silicone rubber 32 N blue medium hard set duplicating silicone liquid
Product information "REPLISIL 32 N Blue SET"
REPLISIL 32 N blue SET
application
REPLISIL 32 N is an addition curing 1: 1 duplicating silicone with the final hardness of Shore A32, low viscosity with the best mechanical properties. It is used to produce negative forms that are extremely precise in terms of dimensions and detail.
processing
REPLISIL components A and B at room temperature in a ratio of 1: 1 approx. Mix for 1 minute until a streak-free, uniform shade of red results, then pour into the flask with the non-watered plaster model in the same place until the model is completely covered. In the case of manually mixed mass, place briefly on the vibrator to Remove air pockets. After a curing time of approx. The model can be removed from the mold for 30 minutes at a room temperature of 23 ° C, but should be followed for a short time (approx. 20 min.) So that any impressions of undercuts that may be present can be restored.
Important processing information
Silicones are very sensitive to temperature. Please pay attention to the recommended temperature during storage and processing.
Technical specifications
Dosage: 1: 1
Product color: blue
Mixing time: approx. 5 minutes
Setting time: approx. 20 minutes
Hardness: Shore A32
Density: 1.19 g / cm3
: approx. 11,000 mPas
Linear dimensional change:
( din 53 504 S 1): 4.3 N / mm²
( din 53 504 S 1): 369%
(ASTM D 624 B): 8.2 N / mm²
Mixing ratio:
1: 1
Product type:
silicone
Colour:
blue
Dimensional change in% after 24h:

Hardening time at 23 degrees Celsius:
20 min
Shore hardness:
A32
specific weight:
1.19
Viscosity:
11000 mPas
Mixing time at 23 degrees Celsius:
5 min
Elongation at break (in%):
369
Tensile strength:
4.3 N / mm2
Product information "REPLISIL 32 N Blue SET"   REPLISIL 32 N blue SET application processing Important processing information Technical specifications Dosage: 1: 1 Product color: blue Mixing time: approx. 5 minutes Setting time: approx. 20 minutes Hardness: Shore A32 Density: 1.19 g / cm3 : approx. 11,000 mPas Linear dimensional change:  ( din 53 504 S 1): 4.3 N / mm²  ( din 53 504 S 1): 369%  (ASTM D 624 B): 8.2 N / mm² Mixing ratio: 1: 1 Product type: silicone Colour: blue Dimensional change in% after 24h: Hardening time at 23 degrees Celsius: 20 min Shore hardness: A32 specific weight: 1.19 Viscosity: 11000 mPas Mixing time at 23 degrees Celsius: 5 min Elongation at break (in%): 369 Tensile str
Marke
REPLISIL