Milliput White Black Yellow Terracotta Silver Your Choice "Buy more and Save"

Description

Shipping days are Thursday and Monday with a 3.30PM cut-off. Ships from Texas.
Black
was introduced in response to user demand and can be used for Repairs to antique clocks, Guttering, Ebonised wood, Marble, Slate, Cast iron, Basalt ceramics and black plastic parts in cars (such as bumpers, small handles, buttons and knobs).
Silver Grey
was introduced as a slightly finer filler and is widely used for model making, sculpting, taxidermy and for the repair of garden ornaments.
Yellow
The epoxy putty with a thousand uses in modelling D.I.Y and industry.
Terracotta
For the restoration of terracotta and other ceramics. Also for the repair of garden urns, pots, Statuettes and damaged brickwork, etc. Also for sculpting and modelling.
Turquoise Blue
has been formulated with makers in mind, the epoxy putty with a thousand uses now comes to you in a vibrant brand new color.
White
For the restoration of porcelain and other ceramics for the repair of antiques, objects d'art, Victorian dolls, picture moldings, etc. For sculpting and modelling. For the repair of white domestic chinaware and for filling scores and dents in white domestic equipment e.g. washing machines, refrigerators, etc.
Each grade is presented in similar packs containing 2 x 56.7gm sticks and the general instructions for preparation and usage are the same.
Typical applications:
- Model making
- Wood turning
- Jewellery Making
- Sculpting
- Picture frame restoration
- Damaged brickwork
- Underwater applications
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130C.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependent on temperature and at normal temperatures (20-25C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawed, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Shelf Life:
We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.