DSX 1DSX-1048 8 Door Package! Slight differences in each item's Enclosure!

Description

Auction is for a
USED
DSX-1048
Intelligent Controller. This includes the DSX-1040E enclosure, one DSX-1040CDM controller board for fused pwr output to the DSX-1042 door controller boards, each of which controls two doors two sets of dr contacts two sets of RTEs & two sets of aux inputs. Four DSX-1042 controllers are included, for 8 doors total. The unit HAS previously been installed, and was removed in working condition by a Master Certified Tech. Please be aware that the enclosure does have various knock-outs removed already. The enclosure may also be some what out of square (it may be bent slightly). It will, however shut & lock. Keys will NOT be included.
®DSX Access Systems, Inc.
DSX-1048 Intelligent Controller
Scalable Architecture 2-8 doors
TCP/IP Communications
Individual Intelligence
512K RAM / 512K Flash ROM
UL 294 / UL 1076
260+ Card and Keypad Formats
FIPS/TWIC Card Compatibility
Real Time Processing and Communications
Integrated Power Supply and Distribution
DSX Access Systems, Inc.
10731 Rockwall Road
Dallas, Texas 75238
888-419-8353
www.dsxinc.com
DSX-1048 Specifications
Processor  AM186 20Mhz
RAM/ROM Memory  Flash ROM 512K  Standard RAM 512K
Communication Ports
:
DSX-1042
RS-232 In 1 Master to PC
RS-232 Out 1 Panel to DSX-1040CDM
1040CDM
RS-232 In 1 Master to DSX-1040CDM
RS-232 Out 1 Slave Communications
RS-485 In 1 From previous DSX-1048 Package
RS-485 Out 1 To subsequent DSX-1048 Packages
Power Requirements
:
DSX-1042 13.5 VDC @ 300ma from 1040CDM
DSX-1040CDM 13.5 VDC @ 150ma from 1040PDP
Total Maximum Current 13.5 VDC @ 6.0A
Output Voltage
Panel outputs provide a regulated, fused, DC voltage.
DSX-1042 9-13.5VDC - 12VDC nominal - 1A Fused
DSX-1040CDM 9-13.5VDC-12VDC nominal-1.5A Fused
DSX-1040CDM 5VDC - .5A Fused
All Outputs are Class 2, Power Limited
Inputs
:
EOL Supervised 32
16 Inputs are used for standard point monitoring.
16 Inputs are used for door position and exit request monitoring.
All Inputs support two, three, and four state monitoring with five programmable circuit types.
Outputs
:
Form C Relays: 8
Relay Output Ratings: 5 AMP - 30VDC
Open Collector Outputs: 8 - negative 100ma
LED Outputs: 24 - 3 per reader port - negative 100ma
Pre-Alarm Outputs: 8 - 1 per door - negative 100ma
Access Controlled Entry Points
:
Card Reader or Keypad 8
Card and Reader Formats 260+ including FIPS/TWIC
Any combination of card readers, keypads, or card and keypad controlled entry points may be used.
Equipment Size
:
DSX-1040CDM 11" W x 4.5" H x 1.5" D
DSX-1042         11" W x 4.5" H x 1.5" D
Equipment Weight
:
DSX-1040CDM: 1.0 lb.
DSX-1042          1.2 lb. each
Enclosure Type
:
Nema Type 1 equivalent enclosure with lift-off hinged door, lock/key, and tamper switch.
Enclosure Size
DSX-1040E Cabinet: 15.5" W x 22.5" H x 6" D
Enclosure Weight
DSX-1040E Cabinet 19.2 lb.
Finish
Black Powder Coat with White Silkscreen on Enclosure and Black Enamel on DSX-1042.
Conduit Knockouts
Concentric knockouts in Top, Bottom, and Sides.
Knockouts accommodate 1/2, 3/4, 1, 1 3/4 inch conduit.
Temperature
Operating 32 to 131 F
Storage -35 to 150 F
Humidity
Operating 0 to 95%, relative
Returns Not excepted, But all effort will be made to satisfy any problems. All boards tested before shipped.