Axial 1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR, Green AXI90081T2

Description

Axial 1/24 SCX24 Deadbolt 4WD Rock Crawler Brushed RTR, Green AXI90081T2
Item Description -
This unit is not complete. Missing battery, motor, body clips and some screws. Units remaining parts have NOT been tested. There are cosmetics throughout unit. Overall, this unit is in a heavily used, for spare parts condition. This units box has been marked “NW” to signify that unit does NOT come with a manufacturer's warranty. Thank you for your interest.
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide strength and durability
Rugged steel C-channel frame rails with bracing keep everything rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
Needed to Complete
Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included!
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite
®
88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial
®
AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Overview
The SCX24™ Deadbolt™ 4WD is the first Axial
®
off-roader in 1/24 scale. At less than 8" long, it's the perfect rig to take along on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped to tackle tough climbs and rough trails. Like the larger SCX10™ II chassis, this smaller version uses plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. Check out that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you'll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite
®
88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter!
Approximate Assembly Time:
No assembly required
Batteries:
7.4V 350mAh 30C LiPo
Body:
Painted and trimmed Axial Deadbolt
Charger:
USB LiPo charger
Chassis:
Stamped steel rails
Completion Level:
Ready-To-Run
Differential:
Worm gear 16T/4T
Drivetrain:
4WD
Ground Clearance:
1.06" (27mm)
Height:
4.73" (120.2mm)
Length:
7.8" (199.5mm)
Motor Size:
180
Motor Type:
Brushed
Pinion:
10T
Radio:
AX-4 2.4GHz 3-channel
Scale:
1/24
Servos:
AS-1 steering servo
Shock Type:
Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Speed Control:
AE-6 ESC receiver/combo
Spur Gear:
55T
Suspension:
Solid axle, front and rear
Tire Diameter:
2.0" (51mm)
Tire Tread:
Nitto Trail Grappler M/T, large block tread
Track:
3.9" (99.5mm)
Vehicle Type:
Crawler
Water-Resistant:
No
Weight:
0.5lb (0.22kg)
Wheel Diameter:
1.0" (26mm)
Wheel Type:
Black Plastic Licensed KMC XD229 Machete Crawl
Wheel Width:
0.48" (12.4mm)
Wheelbase:
5.25" (133.5mm)
Width:
3.9" (99.5mm)
Shipping Details
All orders shipped via UPS Ground or US Postal Service.
Shipping rate listed above only applies to the 48 Contiguous States
Please contact us for shipping quotes to Alaska, Hawaii, Puerto Rico and Canada (we are not responsible for customs/import fees). A surcharge fee will be automatically added.
We ship within 1 business day of receiving cleared payment.
For all shipments
Tracking Numbers
are sent automatically to the email address you have registered with eBay /. If you do not receive one within 24 hrs please email us for a tracking number.
Payment Details
Payments are due within 3 days of auctions close.
Paypal is only accepted payment method at this time
Paypal will accept credit card or debit card payment (Visa, Master Card, American Express, and Discover)
Unpaid Item Reminders (UPI) are filed after 10 Days, we understand there may be unforeseeable circumstances that may not allow the payment to be made in a timely fashion. Please contact us in these rare cases and we will make exceptions on a case by case basis. Please email us as soon as possible so we can hold your item if need be.
Additional Information
Feedback
is left for you automatically as soon as payment is received. If you are not please with your purchase in any way, please allow us the opportunity to correct any issues before leaving other than Positive Feedback. We strive for 5 Star customer satisfaction on all transactions and feel confident we will address your needs if given the opportunity. If you have any questions or concerns please contact us through the contact member link at the top or bottom of the page